Improved Ground Clearance with OE Ride Quality

The 2017-2023 Super Duty is an undeniably tough looking truck straight from the factory, but with an unsightly front rake and smaller than ideal wheels/tires, it isn't perfect. Icon's 2.5" Stage 1 Suspension System kills two birds with one stone by leveling out your F250 or F350's stance and making room for 35" tires. This simple yet effective lift includes two extended dual rate coil springs and a set of front and rear Icon 2.0 Aluminum Series shocks. Together your Super Duty will deliver exceptional control over a variety of terrains and an OE-like, supple street ride.

Vehicle-Specific Shock Tuning

This Stage 1 Suspension System by Icon has been designed specifically for your 2017-2023 Super Duty to provide the ultimate upgrade in off-road performance and ride quality. The 2.5" extended dual rate coil springs allow improved ground clearance for more capable off-roading and bigger wheels and tires. The Icon 2.0 Aluminum Series shocks are fully rebuildable and revalvable, while the corrosion-resistant anodized shock bodies ensure long-term dependability.

Fitment:

2017-2023 F250/F350 4WD
Designed for 6.7L diesel models only

Super Duty Ride Height Note: due to their slightly lower factory ride heights, this part number will result in at least an additional .75" of ride height on Super Dutys.

Wheel & Tire Fitment: 35x12.50 tires & 8.5-9" wide wheels with 5" backspace

Write a Review

Will this kit work with the Tremor models?

Asked by: Ryan - 9/4/2021

This kit will not fit the 2020-2021 Tremors. ICON has a new kit that's specific for 2020-2021 Super Dutys here. The new version of the kit will fit Tremor models, but they'll only gain 1" of ride height from the included springs.

Was this answer helpful? 0 of 0 Found Helpful.

Answer provided by: Jason@Stage3 (9/7/2021)

Submit an answer

Do the rear shocks have a height adjustment of 1in. From stock or is it leveled factory height on stage 1 icon shock kit

Asked by: Roy - 2/18/2021

The rear shocks are not adjustable, but they are long enough to handle up to 2" of rear lift for a larger rear block, add-a-leaf kit, or aftermarket leaf springs.

Was this answer helpful? 0 of 0 Found Helpful.

Answer provided by: Jason@Stage3 (2/24/2021)

Submit an answer

Does this kit require (or come with) anything to adjust for the track bar geometry, like a relocation bracket? How about bushings to allow for proper alignment? I've seen this with other kits, along with things like sway bar drop brackets.

Asked by: Jeff - 4/16/2018

This kit only comes with the leveling springs, front shocks, and rear shocks. In general, you should be able to have your truck aligned at least close to factory specs without any issues, however, your front axle position will be thrown off without the use of either an adjustable track bar or track bar drop bracket.

Was this answer helpful? 3 of 4 Found Helpful.

Answer provided by: Jason@Stage3 (4/17/2018)

Submit an answer

Do I need any other parts if I choose the stage 1 kit? Looking to run 35-12.50x20 on 20x9 SOTA wheels. Also, do you have it in stock?

Asked by: John - 4/30/2017

The ICON Stage 1 Kit does not strictly require any additional hardware. That particular wheel and tire combination should be fine for this kit, though wheel and tire fitments also depend somewhat on the offset and backspacing of the wheels. For the latest stocking information and availability, give us a call directly at 623-434-5277.

Was this answer helpful? 0 of 0 Found Helpful.

Answer provided by: Jason@Stage3 (5/1/2017)

Submit an answer

Do I need any other parts if I choose the stage 1 kit? Looking to run 35-12.50x20 on 20x9 SOTA wheels. Also, do you have it in stock?

Asked by: John - 4/25/2017

The ICON Stage 1 Kit does not strictly require any additional hardware. That particular wheel and tire combination should be fine for this kit, though wheel and tire fitments also depend somewhat on the offset and backspacing of the wheels. For the latest stocking information and availability, give us a call directly at 623-434-5277.

Was this answer helpful? 0 of 0 Found Helpful.

Answer provided by: Jason@Stage3 (4/26/2017)

Submit an answer

Have Questions?

Stage 3 Rewards is our free customer loyalty program. Earn points on every order and redeem for cash off your next purchase.

100 bonus points just for signing up ($2 to start)
1 point per dollar spent on every order (2% back)
Bonus points for reviews, birthdays, and social shares
Redeem for $10, $20, $30, $50, or $100 off coupons

See full program details

WARNING: Cancer and Reproductive Harm

This product can expose you to chemicals including those known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information, visit [www.p65warnings.ca.gov](https://www.p65warnings.ca.gov).

2017-2023 Ford F250 & F350 Icon 2.5 inch Stage 1 Suspension System | K62511

Improved Ground Clearance with OE Ride Quality

Vehicle-Specific Shock Tuning

Will this kit work with the Tremor models?

Do the rear shocks have a height adjustment of 1in. From stock or is it leveled factory height on stage 1 icon shock kit

Does this kit require (or come with) anything to adjust for the track bar geometry, like a relocation bracket? How about bushings to allow for proper alignment? I've seen this with other kits, along with things like sway bar drop brackets.

Do I need any other parts if I choose the stage 1 kit? Looking to run 35-12.50x20 on 20x9 SOTA wheels. Also, do you have it in stock?

Do I need any other parts if I choose the stage 1 kit? Looking to run 35-12.50x20 on 20x9 SOTA wheels. Also, do you have it in stock?

Pick Up Where You Left Off