Factor 55 FlatLink E Shackle Mount (Green) | 00080-08

Factor 55 FlatLink E Shackle Mount Features:

• 6000 series aluminum construction
• Eliminates hook rattle & fairlead damage
• Fits common 3/4 shackles & D-Rings
• Fits steel cables and synthetic ropes up to 3/8"
• Max Load Rating: 16,000 pounds
• Ultimate Failure: greater than 40,000 pounds
• Simple snap ring removal for shear pin
• Green anodized finish

Premium FlatLink E Shackle Mount for Off-Road Recovery

Conventional winch hooks can cut and fray recovery straps, often allowing the strap ends to escape during momentary slack cycles of a typical winching recovery. Instead of just accepting you have to constantly replace recovery straps, pick up the Factor 55 FlatLink E Shackle Mount for all of your recovery needs! The FlatLink E is a premium folding shackle mount for recovery winches and requires zero splicing for any steel cable or synthetic ropes up to 3/8" in diameter. Additionally, with less than 1.75" of thickness, the FlatLink E will work with all roller fairlead license plate mounting brackets for easy operation in every situation. EDPM rubber guard protect the fairlead and are securely attached to the FlatLink E with 4 barbed tips. The FlatLink E is also the expert version of Factor 55's FlatLink series, so you'll need to monitor whether or not the shackle may have shifted and rotated in the recovery tackle. Better yet, this shackle mount comes finished with a green anodized powder-coating that adds an aggressive appeal to your ride without compromise.

Premium Billet Aluminum Construction & Installation Info

Factor 55 manufactured their FlatLink E Shackle Mount from 6000 series billet aluminum construction to ensure unmatched strength and reliability during any winching applications. The hardcore construction of this unit results in an impressive 16,000 pound max load rating and 40,000 pound ultimate failure, making it tough enough for just about any job you have in mind. When it comes to installation, the cable eye is retained in the FlatLink by a 5/8" diameter double shear pin and internal snap ring, making for a simple ans straightforward process you can complete at home. The FlatLink E stows neatly against either roller or Hawse fairleads and is designed to be used with common 3/4" shackles.

Fitment: Semi-Universal