Name: 2010-2013 Ford SVT Raptor BDS 4 inch Suspension Lift Kit
Brand: BDS Suspension
SKU: 1511H
Price: 1911.75 USD
Availability: InStock

Highlights:

Clear up to 37" Tires
Features 4" Strut Spacers and 4" Rear Blocks
Includes Relocation Brackets
Re-Uses Front and Rear Fox Racing Shocks
Backed by BDS' No-Nonsense Warranty

Heavy-Duty Medium Sized Lift

One of the most well-rounded lifts you can do for your 4WD F150 Raptor is this 4" Suspension Kit from BDS. Cost-effective, heavy-duty and reliable, it gives you the ability of maintaining a daily driven truck while also giving you the ability of throwing on some rugged off-road wheels and tires for the weekend warrior in you. This impressive suspension package was designed specifically to work with the Raptor SVT while utilizing some of the already impressive suspension components that were originally installed at the factory. They not only pair up the best suspension parts available for your Raptor but BDS also back it up with their "No-Nonsense Warranty" which means that each of their components will last for the life of your truck or else they will replace them without any questions. This kit includes heavy-duty suspension components that give your Raptor an impressive stance with just the right amount of ground clearance and an impressive stance that separates it from the rest of the pack.

Raptor-Specific Suspension Components

The Raptor originally comes from the factory with some awesome suspension components that make it the bad-boy, off-road truck it is so BDS compliments the current system by relocating the existing coilovers and shocks with a heavy-duty spacer at the frame mount while the rear shocks are relocated at the axle with bolt-on brackets. A Raptor-specific front skid plate relocation bracket is also included to make sure the plate still blends in cleanly with the BDS crossmember. During their real-world testing, BDS found the 4" lift to be the best use of the full range of suspension travel allotted by the existing factory suspension components. The BDS 4" lift kit/suspension system reuses the front and rear Fox Racing Shocks.

Kit Includes:

4" Front Strut Spacer
4" Rear Lift Block
Relocation Brackets
Front Brake Line Relocation Brackets
U-Bolt Kit
Installation Hardware and Instructions

Fitment: 2010, 2011, 2012, 2013 Ford F150 Raptor SVT

Suggested Tire & Wheel Combinations:

37" x 12.50" w/20 x 9 and 5" back spacing
37" x 12.50" w/18 x 9 and 5" back spacing

Warranty Information: BDS Suspension backs their kits with a straightforward lifetime warranty: "If you are the original purchaser of any BDS lift kit and it breaks, we will give you a new part. Period."

Write a Review

How can this fit with the stock wheels and tires? Wheel spacers?

Asked by: DLEE - 2/12/2021

You would require at least a 1.00" wheel spacer to clear the stock wheels and tires. However, we generally recommend using a 1.50" wheel spacer in order to avoid stud trimming.

Was this answer helpful? 1 of 1 Found Helpful.

Answer provided by: Jason@Stage3 (2/16/2021)

Submit an answer

Does this work with aftermarket springs like the Deavers? The Deavers get rid of the rear blocks so if this kit includes 4" blocks will this be an issue? Do I need to return to stock leaf springs to use this kit. Question 2, back spacing needs to be 5" minimum? or will 4.56" work with a spacer?

Asked by: Ray - 8/9/2020

The Deavers will be an issue, however, you do not necessarily need to remove them. You would just need a smaller block to maintain the correct rear lift and likely some custom U-bolts to fit both the Deavers and your choice of block. Your best bet would be to call us directly at 623-434-5277 so we can get more specific about your Deaver part number and how much lift you want to run in the rear of your truck. As for you wheels, this kit requires a wheel with a maximum of a 5" backspace to clear a 12.50" wide tire, so a wheel with a 4.56" backspace will work just fine.

Was this answer helpful? 0 of 0 Found Helpful.

Answer provided by: Jason@Stage3 (8/10/2020)

Submit an answer

I am looking to buy new suspension all around my truck, I am looking at king 3 inch shocks. Will those fit this lift? They are designed to drop right into the stock suspension. And if this lift is designed for the stock shocks, they should fit together in theory. Am I correct?

Asked by: Johnny P - 7/8/2020

The Kings will technically bolt up to this kit's strut spacers and rear shock extensions. There are two problems, though 1). The Kings have extra ride height out of the box, which may cause issues and give you rear rake. 2). You may have to find a new mounting location for the coilover's reservoirs, since the ride height change may not leave you with enough hose for their normal/recommended mounting locations.

Was this answer helpful? 0 of 0 Found Helpful.

Answer provided by: Jason@Stage3 (7/9/2020)

Submit an answer

Well I be able to use the same tires just different rims

Asked by: Jerry - 4/22/2019

As long as your choice of wheels meets BDS's 5" backspacing requirements, you'll be able to reuse the stock 315/70R17 or a 35x12.50R17.

Was this answer helpful? 0 of 0 Found Helpful.

Answer provided by: Jason@Stage3 (4/23/2019)

Submit an answer

I got a 2012 raptor crew cab can I still use the stock wheels with this lift ?

Asked by: Omar - 4/16/2017

According to BDS, you would not be able to reuse your factory wheels with this lift kit.

Was this answer helpful? 1 of 1 Found Helpful.

Answer provided by: Jason@Stage3 (4/17/2017)

Submit an answer

Is this kit compatible with a 2010 fx4?

Asked by: birdman - 9/25/2016

It is not. This kit is only for Raptors. A version for 2009-2014 F150s is available here.

Was this answer helpful? 0 of 0 Found Helpful.

Answer provided by: Jason@Stage3 (9/26/2016)

Submit an answer

Have Questions?

Stage 3 Rewards is our free customer loyalty program. Earn points on every order and redeem for cash off your next purchase.

100 bonus points just for signing up ($2 to start)
1 point per dollar spent on every order (2% back)
Bonus points for reviews, birthdays, and social shares
Redeem for $10, $20, $30, $50, or $100 off coupons

See full program details

WARNING: Cancer and Reproductive Harm

This product can expose you to chemicals including those known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information, visit [www.p65warnings.ca.gov](https://www.p65warnings.ca.gov).

2010-2013 Ford SVT Raptor 4WD BDS 4 inch Suspension Lift Kit | 1511H

Heavy-Duty Medium Sized Lift

Raptor-Specific Suspension Components

How can this fit with the stock wheels and tires? Wheel spacers?

Does this work with aftermarket springs like the Deavers? The Deavers get rid of the rear blocks so if this kit includes 4" blocks will this be an issue? Do I need to return to stock leaf springs to use this kit. Question 2, back spacing needs to be 5" minimum? or will 4.56" work with a spacer?

I am looking to buy new suspension all around my truck, I am looking at king 3 inch shocks. Will those fit this lift? They are designed to drop right into the stock suspension. And if this lift is designed for the stock shocks, they should fit together in theory. Am I correct?

Well I be able to use the same tires just different rims

I got a 2012 raptor crew cab can I still use the stock wheels with this lift ?

Is this kit compatible with a 2010 fx4?

Pick Up Where You Left Off