2020-2022 Ford F250 & F350 6.7L BDS 4 inch Radius Arm Suspension Lift | Part# 1551FS

20-22 F250 & F350 6.7 BDS 4" Radius Arm Suspension Coilover Lift Features:

• Vehicle Specific Fitment
• Can Fit 37in tires With Minor Trimming
• Bolstered With FOX Racing Shocks
• Includes 4.5in Rear Blocks With Proper Hardware
• Backed by BDS's "No BS" Lifetime Warranty
• Requires cutting, trimming, and drilling

An Exterior Upgrade That Also Improves Performance Thanks To FOX

Take your 20-22 F250 or F350 to new heights with this kit from BDS. This kit is designed specifically to work with your truck to not only give it a lift but also make sure it performs well at said lift. Part of the reason it performs better is because of the radius arm that comes as a part of the kit. These radius arms are created with heavy duty 1-3/4" OD -10GA DOM tubing with support gussets that are very durable. Along with the radius arms, BDS also includes specially tuned lift springs springs. This kit also has awesome FOX 2.0 IFP performance shocks that can help create damping on the toughest terrain that results in a very smooth ride. This kit also includes special bushings that help to minimize road vibrations and allow for a long life with minimal to zero maintenance.

Includes Everything Needed To Ensure Smooth Operation

The suspension additions are great but it is not the only thing that makes this kit great. BDS also makes sure to include a NX2 steering stabilizer and two four inch rear blocks that are created with extremely durable materials. The previously mentioned stabilizer also comes with a supplied custom mounting bracket for easy installation. It also means that you can throw oversized tires on your F250 or F350 and need to gain back performance and overall stability to help prevent "death wobble" on or off road. BDS also includes a forged drop pittman arm and heavy duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar relocation brackets to correct the sway bar positioning, and brake line relocation brackets. Professional installation is highly recommended due to the amount of cutting and trimming that may be required to install this kit on your truck.

Tire & Wheel Combinations

• 37 x 12.50 w/17 x 9 and 4.5" - 5" back spacing
• 37 x 12.50 w/18 x 9 and 4.5" - 5" back spacing
• 37 x 12.50 w/20 x 9 and 4.5" - 5" back spacing

Fitment:

• 20-22 F250 & F350 6.7L Super Duty

Installation Note: Torque wrench capable of 405 ft-lbs required.

Factory Leaf Spring Block: Removal of the factory leaf spring block required. Net rear lift will vary depending on height of factory block, but will result in a level stance.

Note On Tremor Models: Due to taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.

Two-piece driveshaft note: Super Dutys with a two-piece driveshaft will require BDS's carrier bearing shim kit here. Please ensure your F250 or F350's driveshaft type before ordering.

Requires cutting, trimming, and drilling: this lift kit requires trimming, cutting, and drilling of your F250 or F350's sub-frame for install. We strongly recommend a professional installation. If your truck has 37 x 12.50 tires then it also may require minor trimming.

For Trucks With Top Mounted Overload Springs: If your truck has a top mounted overload springs you may need to include this U-Bolt for proper installation of this kit.

Special Torque Wrench Required For Install: Installation of this kit requires a torque wrench capable of 405 Ft-lbs