2023-2025 Ford F250/F350 4WD Gas w/o Rear Overload BDS 5 inch Radius Arm Lift Kit w/ FOX 2.0 Shocks & Rear Blocks | 2243FS

F250/F350 4WD Gas BDS 5 inch Radius Arm Lift Kit Features:

• 5-inch lift clears up to 37-inch tires
• FOX 2.0 Performance shocks included
• Gas-specific Pro-Ride coil springs up front
• Heavy-duty tubular radius arms with caster adjust
• Forged drop pitman arm corrects steering angle
• Track bar bracket recenters the front axle
• Rear lift block for trucks without overloads
• Internal floating piston shock design
• Durable anodized aluminum shock bodies
• Fully bolt-on for easier installation

A Balanced Lift with Everyday Driveability

If you’re looking to give your 2023–2025 Ford F250 or F350 4WD gas truck a boost in both height and performance, the BDS 5-inch Radius Arm Lift Kit with FOX 2.0 shocks is a clean, reliable way to get the job done. This kit raises the truck enough to clear up to 37-inch tires, delivering a more aggressive stance without compromising on daily comfort or towing confidence. The front end is lifted using gas-specific Pro-Ride coil springs that are tuned to handle the weight of your gas engine while keeping the ride smooth and consistent across changing terrain. Along with the springs, you get sway bar relocation brackets, brake line extensions, and precision steering correction components to ensure your front-end geometry stays in check once the lift is installed.

Radius Arm Strength and Steering Stability

To give the suspension a stronger foundation, BDS replaces the factory radius arms with heavy-duty tubular steel arms that mount in the original positions. These upgraded arms bring extra strength and ground clearance, plus they offer caster adjustment so your alignment stays on target even with the added height. The system includes a forged drop pitman arm and a heavy-duty track bar bracket to correct steering angles and recenter the front axle. That combination helps eliminate wander and bump steer, giving the truck a more confident feel on the road or trail. OE-style rubber bushings at the frame end help keep things quiet and low maintenance, so you can enjoy a smoother ride without constantly chasing down noise or harsh feedback.

FOX 2.0 Shocks and Rear Lift Designed to Match

The FOX 2.0 Performance shocks included with this kit are a solid step up from entry-level dampers. With an internal floating piston design and aluminum bodies, these shocks are built to stay cool and perform under pressure. They’re tuned specifically for this application, offering better rebound control and ride quality whether you’re loaded down or riding empty. In the rear, the lift comes from a 5-inch fabricated block setup with longer u-bolts. This version is tailored for trucks without factory rear overload springs, which helps maintain the proper stance and keeps the suspension working as intended. Everything in the kit is designed for straightforward installation with a 100% bolt-on design. That means less time in the garage and more time enjoying the capability, stance, and improved handling this setup brings to your Super Duty.

Vehicle Fitment: 2023, 2024, 2025 Ford F250/F350 4WD Gas Models without Rear Overload Springs

Application Notes:

1. This kit is not compatible with trucks equipped with radius arm mounted ride height sensors.
2. Ford recommends the replacement of the pitman arm nut after each time it has been removed.
3. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper.
4. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.
5. Due to the taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.
6. Larger tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and tire fitment section.
7. Minor trimming may be necessary for clearance of 37x12.50 tires on certain wheel setups.
8. Installation requires a torque wrench capable of 406 ft-lbs.
9. Trucks without top mounted overload springs will require (4) UBT4028.
10. Fits SRW models only.
11. Recalibration of your vehicles Advanced Driver Assistance System (ADAS) cameras, radars, light detection and ranging (LiDAR), and other sensors may be necessary by your local dealership or ADAS service center. This will ensure proper functionality of the vehicle features such as lane keeping, lane departure, parking assistance, blind-spot detection, adaptive cruise control systems, and other functions as they did prior to installation. Please connect with your local dealership or ADAS service center. Similar to a wheel alignment, all charges and expenses that may occur from dealership calibrations and adjustments are the sole responsibility of the vehicle owner.