2015-2020 Ford F150 4WD ReadyLift 6 inch Big HD Lift Kit with Falcon Shocks | 44-25620

15-20 F150 ReadyLift Big Lift Features:

• Complete 6" lift kit with high-strength components
• Thick dropped crossmembers
• Made from 3/16" and 1/4" plate steel
• Includes thick, cast steering knuckles
• Adds 6" of front lift to clear 35" tires
• Adds 2.75" of rear lift
• Comes with 4" rear blocks and Falcon 1.1 shocks
• Requires cutting, trimming, and drilling
• For 4WD only

Strong, Durable Lift Kit that Adds 6" of Front Lift to your F150 and can Handle Tough Driving

The only thing better than adding a towering, 6" lift to your awesome 2015-2020 F150 build is when that lift kit is built tough enough to handle even the most aggressive driving on or off-road. Our friends over at ReadyLift are here to make it happen with their 6" Big HD Lift Kit for 2015-2020 F150s. ReadyLift's Big HD lift kit features extremely beefy crossmembers, a thick front differential skid plate, and beefy lifted knuckles that all work together to make this lift kit one of the most durable and reliable lift kits on the market. The ReadyLift F150 Big Lift Kit was designed specifically for trucks that need a whole 'nother level of strength for the trail, street, or track so that you don't end up with day-ruining failure. The kit provides 6" of front lift and 2.75" of rear lift so that you get a clean, leveled look and the ability to easily clear a set of 35" tires. This version of the ReadyLift Big Lift Kit comes standard with Falcon 1.1 rear shocks that provide an excellent on-road ride, improved handling over stock, and much better off-road performance than typical white-body or black-body shocks that come with most lift kits. ReadyLift's F150 lift kit comes with everything you need for install, including new HD alignment cam bolts to help you get your alignment back on track after install.

Extremely Strong Crossmembers with 6" Lift Strut Spacers, Thick Cast Knuckles, Differential Drop Brackets, and Sway Bar Drop Brackets

The kit's heavy-duty construction allows you to push your truck to the limit, all while adding some serious ride height and tire clearance to your F150. The kit's 6" of front lift is provided by a pair of fabricated steel strut spacers that install on top of your F150's stock coilover assemblies. A pair of heavy-duty, cast steering knuckles with raised spindles help correct your F150's UCA angles at your new lifted height and feature a thick, stout construction so that hold together during even the toughest driving. The kit comes with dropped subframe crossmembers made out of a combination of 3/16" and 1/4" steel that's expertly welded together to ensure excellent strength and fitment. The comes standard with differential drop brackets that help correct your CV angles, as well as HD cam bolts to correct your F150's alignment. The two crossmembers are bridged by a 3/16", full-width skid plate that protects the differential at is lower height. The front components are rounded out by sway bar drop brackets with a ReadyLift "R" cut into them for a great look.

Rear Lift Provided by 4" Cast Steel Blocks with U-Bolts, Nuts, and Full-Length Rear Shocks

Each kit gets it's increased rear height is provided by a set of larger rear blocks that are paired with longer U-bolts and full-length shocks. The rear blocks are 4" tall and made out of solid cast steel with a black E-coat finish to help protect them from corrosion. The rear blocks are held in by a full set of U-bolts and U-bolt nuts that keep them solidly in place. The kit comes with a driveshaft spacer and a carrier bearing drop for F150s equipped with two-piece driveshafts. This version of ReadyLifts kit comes with Falcon 1.1 rear shocks that feature a gas-charged, monotube internal design with a digressive linear valving that gives you improved stability and handling both on and off-road. This kit comes with all necessary installation hardware and instructions.

Fitment: 2015, 2016, 2017, 2018, 2019, 2020 F150 4WD

Requires trimming, drilling, and cutting: this kit requires trimming, cutting, and drilling of your F150's subframe for installation.

Backspace Requirements: this kit requires at least an 18" diameter wheel with a maximum backspace of 5" in order to clear a 35x12.50" tire.