Menu
Toggle navigation
Items 0
Cart

2019-2023 Ford Ranger ReadyLift 2 inch Front Strut Extension Leveling Kit | 66-2920

2019-2023 Ranger ReadyLift 2 inch Front Strut Extension Lift/Levleling Kit - 2019-2023 Ranger ReadyLift 2 inch Front Strut Extension Lift/Levleling Kit
2019-2023 Ranger ReadyLift 2 inch Front Strut Extension Lift/Levleling Kit
SKU 66-2920
3 Review(s)
$209.95
0 in stock Ships From Manufacturer. Average Time To Ship Is 5-7 Business Days
Free shipping included
60-day returns on most items
Earn reward points with this purchase
7 Customer Q&A(s)
Write a Review
Please hold for video...
Write a Review
Average Rating
2019 Ford Ranger
I put that leveling kit on a2019 Ford Ranger and it still sits a little low in front.
Did you find this helpful?  7 of 10  Found Helpful
Reviewed by:  from New Richmond Ohio on 1/24/2020
3
Average Rating
2019 Ranger FX4
This level kit was just right. About 2.5" which left a very slight rake, exactly what I wanted. I now have 275/55/20 A/T's mounted and no rubbing.
Did you find this helpful?  2 of 2  Found Helpful
Reviewed by:  from florida on 3/26/2020
5
Average Rating
2019 Ford Ranger
The product has good quality but the 2 inch spacers are tiny and won't level your truck unless your rear is already lowered. I suggest going for the 3 inch level kit.
Did you find this helpful?  2 of 4  Found Helpful
Reviewed by:  (Verified Buyer)  from Irvine, CA on 2/26/2021
3
Load More

Customer Question how thick are the top spacers?

Asked by: Brian Rhea - 5/16/2023
Customer Answer I do not have the physical measurements of this product, what I can say is that it will be less than 2" and front end leveling spacers are not a 1:1 ratio in thickness to vehicle height.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Frank Delmas (10/10/2023)
Submit an answer

Customer Question Can you accompany these spacers with an aftermarket 3inch leveling spring with leveled strut, and or a completed coil over kit in order to achieve around a 4-5 inch lift?

Asked by: Jared - 3/29/2022
Customer Answer Absolutely not. The Rangers at a maximum can only handle about 3" of leveling with the factory UCAs and 3.5" with aftermarket UCAs before their geometry reaches a point where you're causing issues with the front suspension geometry and possibly damaging your CVs. If you're looking for 4" of lift or more, your much better bet would be a complete suspension lift kit.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (3/31/2022)
Submit an answer

Customer Question Is the compatible with the fox 2.0 front coil over? Even if only the top spacer is used?

Asked by: Travis - 7/25/2021
Customer Answer We can't guarantee it, and we can't guarantee what kind of ride height you'll get, even with just the top spacer, since the Fox 2.0s have a different spring and preload.
Was this answer helpful?  1 of 1  Found Helpful.
Answer provided by: Jason@Stage3 (7/26/2021)
Submit an answer

Customer Question compatible with the tremor pkg?

Asked by: James - 6/22/2021
Customer Answer According to ReadyLift, this kit is not compatible with Tremor models.
Was this answer helpful?  1 of 1  Found Helpful.
Answer provided by: Jason@Stage3 (6/23/2021)
Submit an answer

Customer Question What is the point of the bottom spacer? What do you accomplish with a top and a bottom instead of just a 2" top?

Asked by: Hunter - 2/9/2020
Customer Answer The big benefit is that you don't need to design a piece of billet that also has built-in studs, build that stud-laden spacer, and thus save money. Using narrower spacers on the top and bottom allows you to reuse the stock studs on the coilover assembly. Whether that's a good route to go vs. a single upper spacer is debatable.
Was this answer helpful?  1 of 1  Found Helpful.
Answer provided by: Jason@Stage3 (2/10/2020)
Submit an answer

Customer Question Wondering if an update was confirmed to the 2WD/4WD question. I see the product description states it now fits both and sure, that should be obvious enough, but I’m wondering if this lift is tested and confirmed to be ready to go for a 2WD 19+ Ranger. Thank you!!

Asked by: 2019 2WD Ranger Guy - 11/3/2019
Customer Answer Unfortunately, ReadyLift has still not outright confirmed fitment on the RWD/2WD Rangers.
Was this answer helpful?  1 of 1  Found Helpful.
Answer provided by: Jason@Stage3 (11/4/2019)
Submit an answer

Customer Question I recently bought a 2019 2wd ranger and interested in leveling out the front. My problem comes when I see everything listed for 4x4. Could please help out with a recommendation for a 2wd setup. I am not an off-roader (an occasionally bumpy ride here and there) and nothing serious, I just like the look.

Asked by: Calistanga - 8/14/2019
Customer Answer The real issue is that most manufacturers aren't sure yet because they did all their testing on 4WD trucks. Unfortunately, ReadyLift won't outright confirm fitment of this kit on the RWD trucks. However, Auto Spring has confirmed their 2" leveling kit and 2.5" leveling kit will fit the RWD/2WD Rangers.
Was this answer helpful?  1 of 1  Found Helpful.
Answer provided by: Jason@Stage3 (8/15/2019)
Submit an answer
Have Questions?
Load More
Earn reward points
on this product

Stage 3 Rewards is our free customer loyalty program. Earn points on every order and redeem for cash off your next purchase.

  • 100 bonus points just for signing up ($2 to start)
  • 1 point per dollar spent on every order (2% back)
  • Bonus points for reviews, birthdays, and social shares
  • Redeem for $10, $20, $30, $50, or $100 off coupons
See full program details

WARNING: Cancer and Reproductive Harm

This product can expose you to chemicals including those known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information, visit [www.p65warnings.ca.gov](https://www.p65warnings.ca.gov).

Pick Up Where You Left Off

Similar Products & Categories

Logo