Menu
Toggle navigation
Items 0
Cart

2009-2014 Ford F150 Hellwig Adjustable Rate Rear Sway Bar | 7705

2009-2014 F150 Hellwig Adjustable Rear Sway Bar - 2009-2014 F150 Hellwig Adjustable Rear Sway Bar
2009-2014 F150 Hellwig Adjustable Rear Sway Bar
SKU 7705
4 Review(s)
$532.40
6 in stock Ships in 1 Business Day
Free shipping included
60-day returns on most items
Earn reward points with this purchase
10 Customer Q&A(s)
Write a Review
Please hold for video...
Write a Review
Average Rating
2014 F-150 Platinum
This sway bar offered a huge improvement in handling. The truck feels much more planted and flat when going around curves. This with a few HP mods makes for a very fun truck. Installation was easy, taking about 1.5 hours with simple hand tools. This is a must for those who enjoy spirited drives in their F-150 down back country roads.
Did you find this helpful?  9 of 9  Found Helpful
Reviewed by:  from Virginia on 11/22/2019
5
Average Rating
2014 XLT 4X4
This noticably improved the handling over the stock configuration. My truck has the heavy duty off road package so I decided on only adding a rear sway bar since the front is already bigger than standard. It was relatively easy to install, though the instructions could use some specs for initial ending length (I set mine to have to bar parallel to the road at ride height). If you looking to reduce body roll without spending a ton of money, this is the way to go! The truck definitely feels more planted than it did when I bought it new.
Did you find this helpful?  5 of 5  Found Helpful
Reviewed by:  from Jersey Shore, Pennsylvania on 12/1/2020
5
Average Rating
2012 f150 lariat
Installation could have went better. The locking nuts to secure the bar bushings to the axle were VERY difficult to tighten down. Not cross threaded or anything, I think just bad tolerances. Other than that, pretty simple. Would be easier with 2 people so one can hold the bar up for you while you attach it. Definitely prevents a lot of the body roll I had before and stops some walking on the road when hitting potholes/bumps in the road. I have a stiffer suspension than stock.
Did you find this helpful?  4 of 4  Found Helpful
Reviewed by:  from New Jersey on 7/2/2021
4
Average Rating
2014 F150
The “powdercoat” finish on all of my hellwig products, including this swag bar, did not hold up to even one WNY year of use. The hammered grey look chipped and began rusting on both my front and rear sway bars and helper leaf springs. Still giving it a couple stars because of the functionality which isn’t affected by the aesthetics, however i was disappointed. Went with a steeda RSB this time around on my 2021 and so far I’m much happier with the quality
Did you find this helpful?  2 of 2  Found Helpful
Reviewed by:  (Verified Buyer)  from Jamestown on 6/22/2023
3
Load More

Customer Question Does this sway bar fit with a Mag Hytec differential cover?

Asked by: Rob T - 3/30/2024
Customer Answer We have not tried this combination ourselves, but with there being several inches of clearance between the bar and the factory diff cover we would not expect there to be any issues.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Joel Galaz (4/3/2024)
Submit an answer

Customer Question Will this sway bar work on a truck lowered 3” in the rear?

Asked by: Gabriel - 4/11/2023
Customer Answer Unfortunately the link lengths on this kit are for stock height, and would most likely be too long for a truck 3" lower than stock.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Joel Galaz (10/11/2023)
Submit an answer

Customer Question What dies this whole system weigh?

Asked by: Jamie Brewer - 1/21/2023
Customer Answer The entire sway bar kit weighs roughly 35lbs on-truck.
Was this answer helpful?  1 of 1  Found Helpful.
Answer provided by: Jason@Stage3 (1/23/2023)
Submit an answer

Customer Question Any problems fitting this with with a Borla S-Type exhaust?

Asked by: David - 2/28/2022
Customer Answer We haven't tried the combination ourselves yet. However, from looking at the installation guides, I don't think there will be a conflict, since the Sway Bar installs under the axle, and the endlinks install forward of the axle.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (3/1/2022)
Submit an answer

Customer Question 2012 4x4, will this still be ok with a 2" block?

Asked by: David - 1/10/2022
Customer Answer Yep. According to Hellwig, this sway bar kit can handle up to 2" of rear lift, and can handle a 2" block without issues.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (1/11/2022)
Submit an answer

Customer Question Will this fit my 14 f150 regular cab, it has a 5 inch flip kit drop

Asked by: Cesar - 11/21/2020
Customer Answer We can't guarantee that this sway bar will work with an axle flip.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (11/23/2020)
Submit an answer

Customer Question I have a '14 FX4 installed with Airlift rear bags for towing. Can I improve stability/ handling with the installation of a rear sway bar with this setup? Or not much? I use the truck as a daily driver but it's set up for hunting off road.

Asked by: Rocky - 8/3/2020
Customer Answer You may have an issue, since some AirLift Kits will interfere with the installation of the sway bar. If you do happen to have a RideControl kit, you can probably install the sway bar and it would be beneficial to towing. However, your best bet would be to call us directly at 623-434-5277 or email us at [email protected] so we can get more specific about what AirLift kit you have.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (8/4/2020)
Submit an answer

Customer Question Will this work on a 2012 4WD with Fox 2.0 Level 1 leveling kit on it?

Asked by: Ryan - 7/14/2020
Customer Answer The Hellwig Sway Bar will work just fine with the Fox 2.0 Stage 1 Kit and the Fox 2.0 rear shocks.
Was this answer helpful?  1 of 1  Found Helpful.
Answer provided by: Jason@Stage3 (7/15/2020)
Submit an answer

Customer Question Will this work on a 2013 2WD w/ a 1.5in rear block?

Asked by: Zach - 7/4/2020
Customer Answer Yep. This kit will work just fine on an RWD truck with an OE-style 1.5" or 1.25" rear block.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (7/6/2020)
Submit an answer

Customer Question Do these mount in the way of traction bars

Asked by: Dylan Riffle - 5/31/2020
Customer Answer That's going to depend pretty heavily on what traction bars you're planning to use and how they install on the rear axle. Check out Hellwig's Instructions here to see if you'll have any conflicts.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (6/1/2020)
Submit an answer
Have Questions?
Load More
Earn reward points
on this product

Stage 3 Rewards is our free customer loyalty program. Earn points on every order and redeem for cash off your next purchase.

  • 100 bonus points just for signing up ($2 to start)
  • 1 point per dollar spent on every order (2% back)
  • Bonus points for reviews, birthdays, and social shares
  • Redeem for $10, $20, $30, $50, or $100 off coupons
See full program details

WARNING: Cancer and Reproductive Harm

This product can expose you to chemicals including those known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information, visit [www.p65warnings.ca.gov](https://www.p65warnings.ca.gov).

Pick Up Where You Left Off

Similar Products & Categories

Logo