2016-2020 Toyota Tundra BDS 7 inch 2.5 Remote Reservoir Coilover Suspension Lift Kit | 818F

BDS 2.5 Remote Reservoir Suspension Kit Features:

• 7" front lift / 4" rear lift, for level stance
• Clears up to 37" tires (Frame bracket modification and welding required)
• FOX 2.5 Remote Reservoir Coilovers
• FOX 2.0 IFP Rear Shocks
• Heavy-duty skid plate protects front differential
• Machined cast iron knuckles
• Extended sway bar end links
• Powder-coated for durability
• BDS "No Fine Print" Lifetime Warranty
• All mounting instructions and hardware included
• Estimated install of approx. 8 hours

FOX 2.5 Remote Reservoir Coilovers and Durable Construction

Improving your on and off-road capabilities of your 2016-2020 Tundra has never been easier with the BDS 2.5 Remote Reservoir Complete Suspension Lift Kit. Included in this Kit comes the FOX 2.5 Remote Reservoir Front Coilovers that adds a true 7" front lift to your truck so you can get that towering, new ride height. Right out of the box the front coilovers are pre-tuned for optimal performance with the option to upgrade the the (DSC) Dual Speed Compression, which allows you to fine-tune the the high-speed and low-speed compression levels to suit any on or off-road application to your liking. The DSC adjuster technology allows for precise suspension tuning with the simple twist of two clearly defined knobs, increasing both the low and high-speed compression levels up to 25%, so you can maximize small bump compliance and traction while still having the extra damping required for violent impacts. Up front features a massive full width belly skid plate to protect your front differential, which connects the heavy-duty 1/4" laser cut steel crossmembers that can handle just about anything you throw at your Tundra. To compensate for the lift of the vehicle, BDS has included a pair of strong, CNC-machined iron steering knuckles to work within the factory traction control constraints, replacing the light-duty factory knuckles.

4" Blocks with FOX 2.0 IFP Rear Shocks

You can't always rely on your factory rear shocks to get every job done, which is why BDS included a pair of FOX 2.0 IFP Rear Shocks providing the clearance for 37" tires to be installed. Included in the kit comes 4" rear lift blocks and extended u-bolts to achieve a slightly tail high stance, giving your Tundra excellent on and off-road handling so you can tackle just about any terrain. Get more out of your 2016-2020 Tundra with the complete BDS suspension kit and feel the difference an aftermarket performance suspension kit can make. Installation will take approximately 8 hours and requires moderate to expert level mechanical skills to complete properly. This kit is backed by the BDS "No Fine Print" Lifetime Warranty, meaning if you're the original purchaser of the BDS lift kit and it breaks, they will replace the part. Period.

Tire and Wheel Fitment:

• 35 x 12.50 w/18x9 and 5-1/2" back spacing
• 35 x 12.50 w/ 20x9 and 5-1/2" back spacing
• 37 x 12.50 w/20x9 and 6-1/4" back spacing
• May require frame and bracket modification and welding

Fitment:

• 2016, 2017, 2018, 2019, 2020 Toyota Tundra 2WD
• 2016, 2017, 2018, 2019, 2020 Toyota Tundra 4WD
• Will Not fit on TRD Pro Models

Important Notes:

• Requires frame bracket modification and welding on 4wd models
• Stock 18" wheels can not be installed. Factory 20" wheels with more than 6.25" backspacing can not be installed
• Models with two piece rear drive line would require rear drive shaft modification.
• Models equipped with 6 piston calipers require modification.