2019-2024 Ford Ranger & 2021-2025 Bronco PowerStop Brake Rotors - Front | AR85198XPR

2019-2024 Ranger & Bronco PowerStop Brake Rotors - Front Features:

• Drilled and slotted rotors provides maximum rotor cooling
• Plated using Silver Zinc-Dichromate for maximum protection against rust and corrosion
• 100% mill balanced and each rotor checked and balanced for safe, smooth braking performance
• Great for brake upgrade and daily-driving
• Does Not Fit Ford Bronco Sport
• 90 Day/3,000 Mile Warranty

The 2019-2024 Ranger & Bronco PowerStop Evolution Drilled, Slotted, and Zinc Plated Rotors Provides Smooth, Safe Braking

The 2019-2024 Ranger & Bronco PowerStop Brake Rotors are the most popular performance upgrade rotors that PowerStop makes. They are known for providing smooth, safe braking because of the rounded slots that sweep away gas and debris. Your brakes are protected from wear and tear by beveled drill holes in the rotors that keep the brake temperatures cool. You will immediately feel safer with increased braking performance no matter where you take your Ranger or Bronco. PowerStop ensures this product will last you a long time by applying silver zinc dichromate plating to the rotor to protect against rust and corrosion. The rotors are easily installed wit a direct OE fit and vane count which makes it incredibly easy to upgrade your vehicle aesthetic and stopping power. It is much easier to install than a direct, bolt-on upgrade. You will get accustomed to the seamless braking ability and never go back to another rotor again.

Break-In Procedure Required for Optimizing Performance

The 2019-2024 Ranger & Bronco PowerStop Brake Rotors needs to go through a break-in procedure for the rotors to perform properly. This procedure establishes an even layer of friction material deposited evenly on the rotors from the brake pads. The even dispersement of the friction material is imperative for proper functionality. The procedure requires you to complete five moderate to aggressive stops from 40 mph down to 10 mph in rapid succession as to not let the brakes cool down in front. Make sure to never come to a complete stop while doing this which will allow the vehicle to roll slightly while waiting for the track light. If you do press on the brake too hard while the rotors are hot, you could possibly leave an imprint on the rotors that could lead to a brake judder. Do the same process again, but with five moderate stops from 35 mph to 5 mph. Drive the vehicle as long as possible without heating the brakes excessively to allow them to cool down. Once they have cooled to standard operating temperature, they should be running normally and you are good to go.

Fitment:

• 2019, 2020, 2021, 2022, 2023, 2024, 2025 Ford Ranger
• 2021, 2022, 2023, 2024, 2025 Ford Bronco 4-Door
• 2021, 2022, 2023, 2024, 2025 Ford Bronco 2-Door

Does Not Fit Ford Bronco Sport