21-26 Bronco Eibach 2.0 Pro-Truck Stage 2 Suspension Package E86-35-056-01-22

Bronco Eibach 2.0 Pro-Truck Stage 2 Suspension Package:

Adjustable 0-4.1 inch Front Lift
Adjustable 1.3-3.8 inch Rear Lift
Stage 2 system featuring front and rear Pro-Truck 2.0 Coilovers
Front adjustable threaded spring perch for load tuning and maximum ground clearance
ERO off-road race spring equipped and compatible
46mm piston monotube design with nitrogen-filled variable force valving
Anodized 6061-T6 billet aluminum coilover mounts
Individually dyno tested for matched performance and reliability
Engineered, tested, and manufactured by Eibach in the U.S.A.
Two-year warranty against factory defects in material and workmanship
Does not fit Ford Bronco Sport

Unlock Your 2021-2026 Ford Bronco's Full Off-Road Potential

If you're looking for a suspension upgrade that transforms your 2021-2026 Ford Bronco from capable to trail-dominant, the Eibach PRO-TRUCK-COILOVER 2.0 Stage 2 Package is the answer. This is a complete front and rear coilover system , not just shocks, not just springs, engineered to deliver the ride height, damping performance, and adjustability that serious Bronco owners demand. Whether you're running Sasquatch or Non-Sasquatch, 2-door or 4-door, 2.3L or 2.7L EcoBoost, this package is purpose-built for your platform.

You'll feel the difference immediately. The monotube design with nitrogen-filled variable force valving delivers smooth, controlled damping across every surface, highway cruising, rocky trails, washboard dirt roads, and everything in between. This isn't a bolt-on leveling kit that compromises ride quality for height. It's a performance suspension system that gives you both.

46mm Monotube Design with Nitrogen-Filled Variable Force Valving

At the core of this package is Eibach's 46mm piston monotube coilover, a design that dissipates heat faster and more consistently than twin-tube alternatives. The nitrogen-filled variable force valving adjusts damping response based on terrain and conditions, so you get a compliant ride on pavement and controlled performance when the trail gets rough. Each coilover is individually dyno tested before it leaves the factory, ensuring matched performance side-to-side and long-term reliability you can count on.

Adjustable Ride Height and Load Tuning

The front coilovers feature an adjustable threaded spring perch, giving you the ability to fine-tune ride height for your specific build. Running heavier bumpers, a winch, or roof-mounted gear? Thread the perch to accommodate the added load while maintaining maximum ground clearance. The coilovers are also ERO off-road race spring equipped and compatible, meaning you can upgrade your spring rates down the road without replacing the entire assembly.

Premium Materials, American Manufacturing

Every component in this kit is built to take punishment. The coilover mounts are machined from anodized 6061-T6 billet aluminum which is lightweight, corrosion-resistant, and significantly stronger than cast alternatives. The heavy-duty bushing system is cycle tested for durability under repeated off-road stress. And the entire package is engineered, tested, and manufactured by Eibach in the U.S.A., backed by their two-year warranty against factory defects in material and workmanship.

Vehicle Fitment:

2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco 2-Door
2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco 4-Door

Does Not Fit Ford Bronco Sport

Application Notes:

Exact lift heights may vary depending on exact packages and weight distribution of vehicle
Eibach does not guarantee fitment, height, or warranties on unlisted applications

Lift Height by Application:

2021-2026 Ford Bronco 2.7L EcoBoost 4WD | Sasquatch & First Edition Front: 0"-2.2" Lift | Rear: 1.3"-2.7" Lift
2021-2026 Ford Bronco 2.3L EcoBoost 4WD | Sasquatch Front: 0.4"-3.0" Lift | Rear: 1.3"-2.7" Lift
2021-2026 Ford Bronco Badlands 2.7L EcoBoost 4WD | Non-Sasquatch Front: 0.3"-2.6" Lift | Rear: 1.7"-3.1" Lift
2021-2026 Ford Bronco Badlands 2.3L EcoBoost 4WD | Non-Sasquatch Front: 0.8"-3.4" Lift | Rear: 1.7"-3.1" Lift
2021-2026 Ford Bronco Base, Big Bend, Black Diamond & Outer Banks 2.7L EcoBoost 4WD | Non-Sasquatch Front: 1.0"-3.3" Lift | Rear: 2.4"-3.8" Lift
2021-2026 Ford Bronco Base, Big Bend, Black Diamond & Outer Banks 2.3L EcoBoost 4WD | Non-Sasquatch | Front: 1.5"-4.1" Lift | Rear: 2.4"-3.8" Lift

Install Guide

Write a Review

2023 Bronco Outer Banks non SAS

These things ride like butter!! If you want a good offroad and a better than stock on road than save money and buy these. Also install them like the Stage 3 youtube video where they install the RC 2in pucks. WAY WAY easier than directions supplied and did with factory UCA and it aligned perfect.

Did you find this helpful? 3 of 3 Found Helpful

Reviewed by: Kevin Bernard from Southern Shores on 4/15/2023

2022 Wildtrak

Great shocks that were affordable and offer a great ride. These also provided a 3” lift this allowing 37” tires. I had the spacer lift before and it was stiff and ate up my ball joints. This setup is great!!

2021-2026 Bronco Eibach 2.0 Pro-Truck Stage 2 Adjustable Suspension Package - 0-4.1

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by: Sam Cee from Ohio on 1/25/2024

Bronco 2D Badlands Sasquatch

These shocks are freaking awesome. The ride quality on the highway and in town is amazing. I absolutely hated the factory Sasquatch shocks they were horrible. They were so harsh on bumps in town. I could feel every bad spot on the highway. The install wasn’t bad. I wish the top hats had the studs like the factory ones. The rear ones were a pain to get the bolt started in the top hats. I was able to get mine almost back to stock ride height, which is want I wanted. I ended up with a 3/4 lift over stock. I have no regrets getting these, the Bronco is a pleasure to drive again.

Did you find this helpful?

Reviewed by: (Verified Buyer) Josh Sparkman from Tennessee on 7/3/2026

2021-2023 Ford Bronco Eibach 2.0 Stage 2 Coilover Package E86-35-056-01-22. This is a direct bolt on for a 2022 BLK Diamond Non SAS? Will raise the height by as much as 4.1" front, and 3.8" rear?

Asked by: Michael - 12/10/2022

On a 2.3L EcoBoost model, you can potentially go that high. Granted, we don't recommend going up to their max height without aftermarket UCAs, tie rods, CVs, or trailing arms. In general, the max we recommend with the coilovers alone is probably 2.5" in the front and 2.75" in the rear.

Was this answer helpful? 0 of 0 Found Helpful.

Answer provided by: Jason@Stage3 (12/12/2022)

Submit an answer

Have Questions?

Stage 3 Rewards is our free customer loyalty program. Earn points on every order and redeem for cash off your next purchase.

100 bonus points just for signing up ($2 to start)
1 point per dollar spent on every order (2% back)
Bonus points for reviews, birthdays, and social shares
Redeem for $10, $20, $30, $50, or $100 off coupons

See full program details

WARNING: Cancer and Reproductive Harm

This product can expose you to chemicals including those known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information, visit [www.p65warnings.ca.gov](https://www.p65warnings.ca.gov).

2021-2026 Ford Bronco Eibach 2.0 Pro-Truck Stage 2 Front & Rear Coilover Package - 0-4.1" Lift | E86-35-056-01-22