2019-2023 Ford Ranger 4WD Fabtech 3.5 inch Ball Joint UCA Lift Kit w/ Rear Dirt Logic Shocks & Intrusion Beam Kit | K2323DL

Ranger 4WD Fabtech 3.5 inch Ball Joint UCA Lift Kit Features:

• 3.5" lift for added ground clearance
• Tubular upper control arms with ball joints
• Maintains proper CV angles and alignment
• Offset Intrusion Beams clear 33" tires
• Welded box design for added beam strength
• Rear lift via blocks and U-bolts
• Includes Dirt Logic 2.25 rear shocks
• Stainless shock body resists corrosion
• Billet aluminum piston for smoother damping
• Polyurethane ends for quiet, solid mounting
• Bolt-on system with no welding required

Trail-Tested Clearance and Control for Your Ranger

If you’re looking to build a more capable off-road Ranger without overcomplicating the setup, Fabtech’s 3.5" Ball Joint UCA Lift Kit with Dirt Logic Shocks and Intrusion Beam Kit delivers exactly what you need. This system gives your 2019–2023 Ford Ranger 4WD the clearance to run 33-inch tires while upgrading key components for a more confident ride on the trail. The front lift is handled with heavy-duty steel spacers that retain the use of your factory Coilovers, keeping the ride smooth while dialing in the extra height. The real improvement happens at the upper control arms. Fabtech swaps out the factory arms for high-clearance tubular versions, complete with extended travel ball joints that improve droop travel and reduce binding when the suspension is working hard. Everything is engineered to maintain correct alignment and CV angles, so you don’t have to worry about strange driveline issues or premature wear.

Dirt Logic Damping and Tire-Clearing Confidence

The standout components in this kit are the rear Dirt Logic 2.25 shocks and the offset Intrusion Beam Kit. Fabtech’s Dirt Logic shocks are purpose-built for aggressive off-road use, with oversized stainless steel bodies, billet pistons, and NitroSteel rods that shrug off abuse. They’re pre-tuned specifically for this lift and the larger tires it supports, so you get plush, controlled damping through rocky sections and washboard roads alike. Compared to stock, they’re a huge step up in both performance and durability. What's more, the included offset intrusion beams are just as important, especially if you're planning to run 33s. Rather than cutting into or removing the factory beams, which are tied into the truck’s crash protection, Fabtech replaces them with boxed steel versions that offer the same safety function while allowing full tire clearance and steer angle. When you put it all together, this kit isn’t just a lift. It’s a carefully thought-out upgrade that makes your Ranger more capable, more durable, and more ready for whatever the trail throws your way.

Vehicle Fitment: 2019, 2020, 2021, 2022, 2023 Ford Ranger SuperCrew 4WD

Application Note: Fits SuperCrew only.