2008-2010 Ford F250 & F350 Superlift 4 inch Lift Kit With 4-Link Conversion With Superlift Shocks | Part# K233

Highlights:

• Steering Stabilizer Brackets
• Engine Specific Coil Springs
• Superlfit Shocks Included
• Manufacturer's Limited Lifetime Warranty

Raise Your Vehicle's Height Through Innovative 4-Link Design

Give your truck more ground clearance and an aggressive exterior upgrade by installing this 4" lift kit from Superlift. In addition to physical exterior upgrades, the folks over at Superlift also make sure that whether you conquering rugged terrain or smooth asphalt city streets you get the best ride quality. At the center of this kit are the engine specific coil springs that help ensure the ride quality on and off road. Superlift has included everything needed to make sure that you can upgrade your exterior without missing a beat when it comes to the quality and strength of your truck. This kit also aligns directly to OEM specifications and comes with a lifetime manufacturer's warranty. Adding this onto your truck also means that you will be able to throw on some meaty 35" tires without having to make any huge modifications. One thing that separates this kit from the rest is the 4-link design. The 4-link refers to the heavy duty tubular arms that use a press-fit REFLEX bushing for superior vibration dampening, durability, and flexibility. This setup helps to control your trucks suspension and tire wear by limiting caster changes throughout the suspension cycle.

Bolt-On Installation Through Detailed Instructions

Included with purchase of this kit is a detailed instruction manual that explains the bolt-on installation process that comes with throwing this kit on your truck. This kit contains radius drop arm brackets, front compression travel-stop brackets, anti-sway bar extensions, stabilizer bracket, front and rear Superlift shocks, and a track bar relocation bracket that prevents stud bind, resulting roll and yaw, and steering wheel kick.

Fitment:

• 2008, 2009, 2010 F250 & F350 Super Duty 4WD

Important Driveshaft Note: If your truck is equipped with a two-piece driveshaft you'll need a carrier bearing drop bracket to prevent driveline vibration. Choose "yes" from the drop-down menu if you have a two-piece driveshaft.

Important Fitment Note: This lift kit is packaged with rear blocks and u-bolts that are configured for Super Duty pickups with the factory 1-7/8" blocks WITHOUT top mount overloads. If your vehicle is equipped with the factory 3.71" block or top mounted overloads, a longer rear u-bolt will be required. Be sure to choose "yes" from the drop-down menu if you have the larger 3.71" rear block or top-mounted overload.