2011-2016 Ford F250 & F350 6.7L 4WD SuperLift 8 Lift Kit w Bilstein Shocks SL-| K991B

8" Lift w/ Improved Ride Dynamics

Something about a 2011-2016 Super Duty riding at factory ride height just doesn't sit well with us here at Stage 3. An 8" lift does a lot of favors for your exterior appearance and stance, but SuperLift's Radius Arm Lift Kit gets you that commanding view of the road along with supple street performance and controlled yet capable off-road dynamics. This kit is based around Superide Select Series monotube gas shocks by Bilstein which come completely assembled and ready to bolt on to reduce installation time. The SuperLift 8" Radius Arm Lift Kit hinges on a set of massive, high clearance tubular radius arms designed to bolt right into the factory mounts. The kit's upgraded radius arms utilize giant press fit OEM Clevite bushings to reduce noise, vibration and harshness. The radius arms are offset to the inside allowing maximum turning radius and tire clearance, allowing you to squeeze 38" tires onto your rugged Super Duty build. This performance-ready 8" lift also contains new, engine specific coil springs that work in conjunction with the included track bar relocation bracket and dropped pitman arm to ensure proper steering geometry and track bar phasing.

Complete Radius Arm Lift with Blocks and Add-a-Leafs for the Rear

SuperLift's 8" Radius Arm Lift Kit features top-of-the-line components and an easy-to-install design that makes overhauling your stock suspension system for comfort and performance convenient and time-conscious. Along with new radius arms and Bilstein Superide Series shocks, the kit includes a track bar relocation bracket, pitman arm, front sway bar correction, and front compression travel-stop relocation brackets to prevent suspension over-compression. The rear lift is achieved through larger rear blocks and add-a-leafs. SuperLift also includes all necessary hardware for installation so you can get to the trails as soon as possible. Complete with high-performance Bilstein monotube shocks, this 8" lift allows you to conquer rough terrain off the pavement and enjoy a smooth comfortable ride on the highway.

Fitment: 2011-2016 Super Duty 4WD 6.7L Powerstroke Diesel

Important Driveshaft Note: If your truck is equipped with a two-piece driveshaft you'll need a carrier bearing drop bracket to prevent driveline vibration. Choose "yes" from the drop-down menu if you have a two-piece driveshaft.

Important Fitment Note: This lift kit is packaged with rear blocks and u-bolts that are configured for Super Duty pickups with the factory 1-7/8" blocks WITHOUT top mount overloads. If your vehicle is equipped with the factory 3.71" block or top mounted overloads, a longer rear u-bolt will be required. Be sure to choose "yes" from the drop-down menu if you have the larger 3.71" rear block or top-mounted overload.

Warranty: SuperLift's 8" Radius Arm Lift Kit is backed by a Lifetime Warranty against manufacturer defect.

Wheel & Tire Fitment: This lift kit will allow you to install 38 x 13.5" tires on 9-10" wide wheels with up to 5.75" back spacing.