2018-2023 Ford Mustang EcoBoost Ford Performance Calibration Pack | M-9603-M4CA

Mustang EcoBoost Performance Calibration Pack Features:

• Improved throttle response throughout RPM range
• Optimized transmission shift schedule
• Includes high-flow performance air filter
• 35 HP peak gain at 2900 RPM
• 76 lbs./ft Torque peak gain at 2600 RPM
• Premium fuel is required
• ProCal 4 Delivery Tool included
• Perform data logging, diagnostics & service functions
• Provides cleaner and more efficient airflow

Power Pack Calibration for Horsepower and Torque Gains

The Ford Performance Calibration pack for the 2018-2023 Mustang EcoBoost is the ultimate upgrade for Mustang enthusiast who want to take their everyday driving experiences to the next level. Designed and tested by Ford Performance engineers, this premium calibration will optimize the overall performance and efficiency of your Mustang's engine and transmission. With the new calibration, your Mustang will experience an impressive 35 HP peak gain at 2900 RPM, and 76lbs//ft Torque peak gain at 2600 RPM. This is achieved through the optimization of the air/fuel ratio, ignition timing, and other key engine parameters corrected by the calibration. As a result, you'll experience better acceleration and improved overall performance each time you get behind the wheel. The throttle response is also optimized which helps deliver smoother shifts, consistent power delivery, and improved fuel economy during a variety of applications. This calibration is intended for used with premium fuel, 91 octane gasoline or higher.

ProCal 4 Delivery Tool for Data Logging & Diagnostics

Ford Performance includes their ProCal 4 Calibration Delivery Tool as a diagnostic and data logging tool, allowing you to keep track of your Mustang's performance in real time and after the trip. Simply plug the tool's cable into your vehicle's OBDII port and you'll be ready to swap out tunes and monitor key parameters with ease. You can even use the high-resolution touch screen and graphical interface to read and clear DTC codes and check log data to ensure your Mustang is performing exactly how you want it to. Better yet, this kit comes equipped with a high-performance air filter that uses a layered, oiled cotton media that is cleanable and reusable for many years to come. Due to the design and engineering of the filter, you'll notice more contaminants are trapped inside to help your ride breathe easy. The calibration pack is designed to be installed by a Ford dealer or certified technician, and won't require any significant or permanent modifications to your vehicle.

Vehicle Fitment: 2018, 2019, 2020, 2021, 2022, 2023 Ford Mustang EcoBoost

Application Note: Not for use with 2020, 2021, 2022, 2023 Mustang 2.3 HO

Important Notes:

• Horsepower and torque gains will not be optimized until fuel octane is learned
• Powertrain calibrations are developed and supported for U.S. and Canadian vehicles
• Premium (91 octane or higher) fuel only
• Due to limitations in the PCM, if stock calibration re-installation is required, you must go to a Ford dealer for 'as-built' calibration installation. Any questions, please contact the Ford Performance Tech-line
• Exclusive Ford Performance Warranty when installed by a dealer

CARB Note: 50 state legal with CARB EO (D-752-17) for 2018, 2019, 2020, 2021, 2022, 2023 models